LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> 3 Mazdaspeed, 2.3 M >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Combination Switch Removal/Installation >> Notes

Combination Switch Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION .)
    2. Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
    3. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    4. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    5. Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
    6. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    7. Column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    8. Clock spring (See CLOCK SPRING REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Identifying Combination Switch Removal Sequence
    G04957025Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals