Rearview Mirror Removal/Installation

Vehicles Without Auto Wiper System 

Removal 

1. Insert a flathead screwdriver between the mirror and the base.
2. Push the base pin down to remove the rearview mirror.
Fig 1: Inserting Flathead Between Mirror And Base
Courtesy of MAZDA MOTORS CORP.

Installation 

1. Install the rearview mirror onto the base.
Fig 2: Rearview Mirror Attachment Procedure
Courtesy of MAZDA MOTORS CORP.

Vehicles With Auto Wiper System 

1. Insert a tape-wrapped flathead screwdriver into the notch and pry with the screwdriver in the direction shown by the arrow to remove the covers. (Vehicles with auto wiper system)
   Fig 3: Prying Rearview Mirror

   Courtesy of MAZDA MOTORS CORP.
2. Remove the covers. (Vehicles with auto wiper system)
3. Remove the rain sensor. (Vehicles with auto wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION .)
   Fig 4: Identifying Rearview Mirror Cover

   Courtesy of MAZDA MOTORS CORP.
4. Remove the clip, and then remove the rearview mirror upward.
5. Install in the reverse order of removal.
   Fig 5: Identifying Rearview Mirror F Roam Base

   Courtesy of MAZDA MOTORS CORP.