LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> Tribute i Touring, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System - Hybrid) >> Powertrain Control Module (Pcm) - 3.0L (4V) Removal/Installation >> Removal

Powertrain Control Module (Pcm) - 3.0L (4V) Removal/Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. See PROGRAMMABLE MODULE INSTALLATION (PMI) .
    NOTE: Any PCM replacement will require that ALL customer keys are available to be programmed at the time of installation. PCM replacement DOES NOT require new keys.
  2. Remove the 2 PCM stud bolt nuts and position the wiring harness and the manifold absolute pressure sensor aside.
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 stud bolts and the PCM.
scientia non olet · About LEMON Manuals