Starting System: Notes
The starting system consists of the:
- Starter motor
- Starter motor relay
- Transmission range (TR) sensor (automatic transaxle)
- Clutch pedal position (CPP) switch (manual transaxle)
- Battery
- Ignition switch
- PCM
- Start diode
When the starter solenoid is energized, a magnetic field is created in the starter solenoid windings. The iron plunger core is drawn into the starter solenoid coil, and a drive lever and pin connected to the starter drive engages the drive pinion gear to the flywheel ring gear. When the plunger is pulled all the way in, its contact disc closes the circuit between the battery and the motor feed terminals. This sends current to the motor, and the drive pinion gear cranks the flywheel to start the engine. When current flows to the starter motor, the starter solenoid pull-in coil is bypassed, and the hold-in coil keeps the drive pinion gear engaged with the flywheel.
This vehicle has one-touch integrated start (OTIS), a computer-assisted cranking system. This feature assists in starting the engine. If the ignition key is turned to the START position and released when the engine begins cranking, the engine may continue cranking for up to 10 seconds or until the vehicle starts.
An overrunning clutch in the starter drive protects the starter motor from excessive speeds during the brief period before the driver releases the ignition switch from the START position as the engine starts.
Vehicles equipped with a manual transaxle have a CPP switch mounted on the clutch pedal bracket. The CPP switch prevents operation of the starter motor unless the clutch is fully depressed.
Vehicles equipped with an automatic transaxle have a TR sensor mounted on the transaxle. The TR sensor prevents operation of the starter motor unless NEUTRAL or PARK is selected. Only automatic transaxles have one-touch integrated start (OTIS), a computer-assisted cranking system. This feature assists in starting the engine, only if the vehicle is in PARK. If the ignition key is turned to the START position and released when the engine begins cranking, the engine may continue cranking for up to 10 seconds or until the vehicle starts.