Front Controls Interface Module (FCIM)

FRONT CONTROLS INTERFACE MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Action
B1318	Battery Voltage Low	CLEAR the DTCs. TEST the charging system. See CHARGING SYSTEM - CONVENTIONAL ENGINE . If the charging system is OK, the DTC was set by a previous low voltage condition. No concern is found at this time. If the charging system is not OK, see CHARGING SYSTEM - CONVENTIONAL ENGINE .
B1342	ECU is Faulted	CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new front controls interface module (FCIM). See FRONT CONTROLS INTERFACE MODULE (FCIM) REMOVAL/INSTALLATION . TEST the system for normal operation.
B2924	Audio Button Stuck	VERIFY no FCIM buttons are stuck and that no FCIM button is pressed during the self-test. CLEAR the DTCs. REPEAT the self-test. If DTC B2924 is retrieved again, INSTALL a new FCIM. See FRONT CONTROLS INTERFACE MODULE (FCIM) REMOVAL/INSTALLATION .
U0140	Lost Communication With Body Control Module (GEM)	NOTE: If no related concern is currently present, disregard the DTC. See PINPOINT TEST 8: THE FRONT CONTROLS INTERFACE MODULE (FCIM) ILLUMINATION DOES NOT OPERATE CORRECTLY .
U0184	Lost Communication With Radio (ACM)	NOTE: If no related concern is currently present, disregard the DTC. See PINPOINT TEST 13: THE ENTIRE AUDIO SYSTEM IS INOPERATIVE .
U2050	No Application Present	See MODULE CONFIGURATION -- HYBRID .
U2051	One or More Calibration Files Missing/Corrupt	See MODULE CONFIGURATION -- HYBRID .