Symptom Troubleshooting (Engine Control System - Hybrid]

• Communications Network - Hybrid
  • Principles of Operation
    • Notes
    • Network Topology - Hybrid
    • ISO 9141 Network Operation
    • MS-CAN Network Operation
    • HS-CAN Network Operation
  • Network Termination
  • Gateway Module
• Communications Network - Troubleshooting - Hybrid
  • Principles of Operation
    • Notes
    • ISO 9141 Communications Network
    • ISO 9141 Network Communication Fault Chart
  • Ms-Can
    • Notes
    • MS-CAN Network Communication Fault Chart
  • HS-Can
    • Notes
    • HS-CAN Network Communication Fault Chart
  • Inspection and Verification
• DTC Chart - Communications Network - Hybrid
• Symptom Troubleshooting Chart - Hybrid
• Connector End Views - Control Systems - Hybrid
• Pinpoint Test 1: The Pcm Does Not Respond To The Scan Tool Or No High Speed Controller Area Network (HS-Can) Communication - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 2: The Anti-Lock Brake System (Abs) Control Module Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 3: The 4X4 Control Module Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 4: The Instrument Cluster Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 5: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 6: The Occupant Classification Sensor Module Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 7: The Power Steering Control Module Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 8: The Transmission Control Module (TCM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 9: The Traction Battery Control Module (TBCM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 10: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 11: The Audio Control Module (ACM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 12: The Dual Automatic Temperature Control (DATC) Module Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 13: The Satellite Digital Audio Receiver System (SDARS) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 14: The Front Display Interface Module (FDIM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 15: The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 16: No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Pinpoint Test 17: No Power To The Scan Tool - Hybrid
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure
• Diagnostic Trouble Code (DTC) Chart - B, C, P And U Codes - Hybrid
• Smart Junction Box (SJB) - Hybrid
  • Principles of Operation
  • Inspection and Verification
• DTC Charts - Smart Junction Box (SJB) - Hybrid
• Symptom Troubleshooting Chart - Smart Junction Box (SJB) - Hybrid
• PINPOINT TEST 1: DTCs B106E/B106F - SOLID STATE DRIVER DISABLED/MODULE DISABLED - HYBRID
  • Normal Operation
  • Possible Causes
  • Diagnostic Procedure