Data Monitoring And Recording Procedure: Notes

Connect the M-MDS or equivalent to the DLC-2.

Fig 1: Locating DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, from the initial screen select the following items:
- When using the IDS (laptop PC)
  1. Select the "Tool Box" tab
  2. Select "DataLogger"
  3. Select "Modules"
  4. Select "IC"
- When using the PDS (Pocket PC)
  1. Select "Module tests"
  2. Select "IC"
  3. Select "DataLogger"
Verify the data according to the monitor items.