LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> CX-9 Touring, 3.7 V, FWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Holder Assembly Note

Holder Assembly Note

  1. Assemble the holder to the gear housing using the SST. 
  2. Connect the SSTs  to the power cylinder section of the gear housing.
    Fig 1: Assembling Holder To Gear Housing Using SST
    G04970488Courtesy of MAZDA MOTORS CORP.
  3. Apply 53.3 kPa {400 mmHg, 15.7 inHg}  vacuum with a vacuum pump and verify that it is held for at least 30 seconds. 
  4. If the vacuum is not held, replace the oil seal.
    Fig 2: Applying 53.3 kPa {400 mmHg, 15.7 inHg} Vacuum With Vacuum Pump
    G04970489Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals