LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> CX-9 Touring, 3.7 V, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU Air Bleeding

DSC/RSC HU Air Bleeding

  1. Turn the ignition switch off.
  2. Connect the M-MDS to the DLC-2.
  3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Chassis".
      2. Select "Braking".
    • When using the PDS (Pocket PC)
      1. Select "All Tests and Calibrations".
  4. Then, select items from the screen menu in the following order.
    • Select "ABS Service Bleed"
  5. Perform the air bleeding according to the directions on the screen.
    Fig 1: Connecting M-MDS To DLC-2
    G04969748Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals