LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> CX-9 Touring, 3.7 V, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat Disassembly/Assembly >> Notes

Front Seat Disassembly/Assembly: Notes

WARNING:
  • Handling the front seat (with a side air bag) improperly can accidentally deploy the air bag, which may seriously injure you. Read the service warnings and cautions before handling the front seat (with a side air bag). (See  AIR BAG SYSTEM SERVICE WARNINGS  .) (See  AIR BAG SYSTEM SERVICE CAUTIONS  .) 
CAUTION:
  • If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS. (See  SEAT WEIGHT SENSOR CALIBRATION  .) 
    • Replacement with a new seat weight sensor 
    • Replacement with a new seat weight sensor control module 
    • Replacement with new passenger-side seat parts 
    • Disassembly of the passenger-side seat 
  • If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS. (See  SEAT WEIGHT SENSOR INSPECTION  .) 
    • Removal of the passenger-side seat 
    • Loosening and retightening of passenger's seat fixing bolts 
  1. Disconnect the negative battery cable and wait for more than 1 minute. 
  2. Remove the side air bag module. (See SIDE AIR BAG MODULE REMOVAL/INSTALLATION .)
  3. Disassemble in the order indicated in the table.
  4. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals