LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> CX-9 Touring, 3.7 V, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Position Memory Control Module Removal/Installation

Position Memory Control Module Removal/Installation

  1. Operate the power seat switch and move the seat cushion forward and upward.
  2. Turn the ignition switch to the LOCK position.
  3. Disconnect the negative battery cable and wait 1 min or more. 
  4. Remove the driver-side front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in the table.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Position Memory Control Module And Connector
    G04971209Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals