LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> CX-7 Touring, 2.3 L, AWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Removal/Installation[L3 With TC]

Ignition Coil Removal/Installation[L3 With TC]

  1. Disconnect the negative battery cable.
  2. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 WITH TC] ).
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Ignition Coil And Connector With Torque Specifications
    G04859744Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals