LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> B4000 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Exterior Mirror Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the front door trim panel. See FRONT DOOR TRIM PANEL .
  2. Remove the interior door handle trim panel.
    • Lift the interior door handle trim panel upward to release the interior door handle trim panel retaining clips.
    Fig 1: Window Control Switch From Door Trim Panel Finish Panel
    G00461779Courtesy of MAZDA MOTORS CORP.
  3. Remove the exterior mirror control switch.
    • Disconnect the electrical connector
    • Press the 2 exterior mirror control switch retainer tabs.
    • Remove the exterior mirror control switch from the interior door handle trim panel.
    4. Fig 2: Removing & Installing Front Door Switch Panel
    G00461773Courtesy of MAZDA MOTORS CORP.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals