Climate Control Unit Inspection [L3 With TC]: Notes
WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the all center panel connectors.
- Turn the ignition switch to ON position.
- Measure the voltage at each climate control unit terminal and refer to
.
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harness.
- If the parts under "Inspection item(s)" are found to be normal, replace the climate control unit.
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harness.