Specification (Unloaded)
Rear wheel alignment
REAR WHEEL ALIGNMENT SPECIFICATION
| Item | Specification | |||||
|---|---|---|---|---|---|---|
| Fuel gauge indication | Empty | 1/4 | 1/2 | 3/4 | Full | |
| Total toe-in | (mm {in}) | Tire: 2+/-4 {0.08+/-0.16}, Rim inner: 1.4+/-2.8 {0.06+/-0.12} | ||||
| (degree) | 0°11'+/-0°22' | |||||
| Camber angle *2 [Tolerance ±1°] | -1°13' | -1°15' | -1°17' | -1°19' | -1°21' | |
| Thrust angle [Tolerance ±0°48'] | 0° | |||||
1 : Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
2 : Difference between left and right must not exceed 1 °30 '.
NOTE:
- Adjust the toe-in after adjusting the camber.