Power Outer Mirror Switch Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Disengage clips using a tape-wrapped flathead screwdriver.
Remove the switch panel from the front door trim keeping the tab from catching.

Fig 1: Removing Switch Panel
Courtesy of MAZDA MOTORS CORP.
Disconnect the power window main switch connector and power outer mirror switch connector.
Remove the screws and the power outer mirror switch.
Install in the reverse order of removal.

Fig 2: Identifying Power Outer Mirror Switch
Courtesy of MAZDA MOTORS CORP.