LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 626 (Engine Control System) >> Clutch Pedal Position (CPP) Switch Inspection >> Circuit Open/Short Inspection >> Notes

Circuit Open/Short Inspection: Notes

WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the PCM connector.
  2. Disconnect the CPP switch connector.
  3. Inspect the following wiring harnesses for open or short circuit. (Continuity inspection)
    Fig 1: Identifying CPP Switch & PCM Wiring Harness Side Connector Terminals
    G04562999Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals