Key Reminder Switch Inspection

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION. )
Disconnect the key reminder switch connector.
Inspect for continuity between the key reminder switch terminals.
- If not as specified, replace the key reminder switch.
  
  Fig 1: Key Continuity Reference Chart
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Inspecting Continuity Between Key Reminder Switch Terminals
  Courtesy of MAZDA MOTORS CORP.