LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Power Systems) >> Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION. )
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: View Of Ignition Switch & Components
    G04327706Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals