LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Power Systems) >> Fuse Block Removal/Installation

Fuse Block Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the left-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION. )
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: View Of Fuse Block
    G04327705Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals