Instrument Cluster Configuration

Connect the SST M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC):
- Select "Module Programming".
When using the PDS (Pocket PC):
- Select "Programming".
- Select "Module Programming".
Then, Select items from the screen menu in the following order.
1. Select "PROGRAMMABLE MODULE INSTALLATION".
2. Select "IC".
Perform the configuration according to the directions on the screen.
Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
- If DTC is present, perform applicable DTC inspection.
  
  Fig 1: Locating DLC-2 Connector
  Courtesy of MAZDA MOTORS CORP.