LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Security System And Locks System) >> Request Switch Removal/Installation >> Trunk Lid

Trunk Lid

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION. )
  3. Remove the screws, then remove the request switch.
    Fig 1: Request Switch
    G04327346Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals