LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Security System And Locks System) >> Request Switch Removal/Installation >> Deiver-side/passenger-side

Request Switch Removal/Installation: Deiver-side/passenger-side

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION. )
  3. Remove the front outer handle. (See FRONT OUTER HANDLE REMOVAL/INSTALLATION ).
  4. Remove the screws A, then remove the handle seat and plate.
  5. Remove screw B, then remove the request switch.
    Fig 1: Request Switch
    G04327345Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals