LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Security System And Locks System) >> Keyless Receiver Removal/Installation

Keyless Receiver Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION. )
  3. Disconnect the keyless receiver module connector.
  4. Remove the nut, then remove the keyless receiver.
  5. Install in the reverse order of removal.
    Fig 1: Keyless Receiver
    G04327337Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals