LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Security System And Locks System) >> Keyless Beeper Removal/Installation

Keyless Beeper Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION. )
  3. Remove the front door speaker. (See FRONT DOOR TRIM REMOVAL/INSTALLATION. )
  4. Remove the screws.
  5. Disconnect the connector.
  6. Remove the keyless beeper from the speaker installation hole.
    Fig 1: Keyless Beeper & Front Door Module
    G04327344Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals