LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 6 i Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Security System And Locks System) >> Customized Function Setting Procedure

Customized Function Setting Procedure

WARNING: This page is about a different car, the 2007 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
    • When using the PDS (Pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "RKE".
  4. Select the item name, and than select either "Disable/Enable".

    Items 

    • Automatic Lock
    • Answer Back Buzzer
    • Card Key Carrying Out Alarm
    • Low Battery Warning
      Fig 1: Locating DLC-2 Connector
      G04327333Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals