LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System (HVAC) >> Solar Radiation Sensor Removal/Installation

Solar Radiation Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Pry the solar radiation sensor from the dashboard using a flathead screwdriver wrapped with protective tape.
  3. Remove in the order indicated in the table.
    CAUTION:
    • After the solar radiation sensor removal, the sensor connector could fall in the dashboard making the installation difficult. Therefore, hold the rooted end of the sensor connector using a clip or similar tool to prevent it from falling.
  4. Install in the reverse order of removal.
    Fig 1: Identifying Solar Radiation Sensor And Connector
    G04956380Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals