LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System (HVAC) >> Refrigerant Pressure Switch Removal/Installation >> Notes

Refrigerant Pressure Switch Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Discharge the refrigerant from the system. (See REFRIGERANT CHARGING .)
  3. Remove the P/S fluid reserve tank. (L3 with TC)
  4. Remove the coolant reserve tank. (L3 with TC)
  5. Loosen the refrigerant pressure switch using two spanners.
  6. Remove in the order indicated in the table.

    LF, L3 

    Fig 1: Refrigerant Pressure Switch Connector - Lf, L3 With Torque Specifications
    G04956390Courtesy of MAZDA MOTORS CORP.

    L3 with TC 

    Fig 2: Refrigerant Pressure Switch Connector - L3 With TC With Torque Specifications
    G04956391Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals