Selector Lever Inspection

WARNING: This page is about a different variant/trim than selected.

Turn the ignition switch to the ON position (engine OFF).
With the brake pedal depressed, verify that there is a "click" at each range when shifted.
Verify that the selector lever can be shifted.
Verify that there is a "click" at each position when shifted from the P position to M range.

Fig 1: Inspecting Gear Shifting
Courtesy of MAZDA MOTORS CORP.
Verify that the positions of the selector lever and the indicator are aligned.
- If there is any malfunction, adjust the TR switch. (See TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT [FN4A-EL] .)(See TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT [FS5A-EL] .)
Verify that the vehicle operates in each selected range.

Fig 2: Identifying Selector Indicator Light
Courtesy of MAZDA MOTORS CORP.