LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 663 (Security System And Locks System) >> Trunk Lid Lock Striker Removal/Installation

Trunk Lid Lock Striker Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Detach the trunk lid opener cable.
  3. Remove the bolts, then remove the trunk lid striker.
  4. Install in the reverse order of removal.
  5. Adjust the trunk lid. (See TRUNK LID ADJUSTMENT .)
    Fig 1: Trunk Lid Lock Striker & Torque Specification
    G04956876Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals