LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Controls L3 With TC) >> Engine Control System Operation Inspection [L3 With TC] >> Main Relay Operation Inspection

Main Relay Operation Inspection

  1. Verify that the main relay clicks when the ignition switch is turned to ON position and then off.
    • If there is no operation sound, inspect the following:
      • Main relay (See RELAY INSPECTION .)
      • Wiring harness and connector between ignition switch and main relay terminal A.
      • Wiring harness and connector between PCM terminal 1 AT and main relay terminal B.
scientia non olet · About LEMON Manuals