LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Outer Mirror Switch Removal/Installation

Power Outer Mirror Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the clips B using a flathead screwdriver wrapped with protective tape.
  3. Remove the switch panel from the front door trim while sliding it in the direction of the arrow as shown in the figure.
  4. Disconnect the power window main switch connector and the power outer mirror switch connector.
    Fig 1: Identifying Switch Panel From Front Door Trim
    G04956728Courtesy of MAZDA MOTORS CORP.
  5. Remove the screws, then remove the power outer mirror switch.
  6. Install in the reverse order of removal.
    Fig 2: Identifying Power Outer Mirror Switch With Screws
    G04956789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals