Continuity Inspection

Remove the CPP switch.
Verify that the continuity between CPP switch terminals B and D is as indicated in MEASUREMENT CONDITION AND CONTINUITY CHART .
- If there is no malfunction, perform the "CIRCUIT OPEN/SHORT INSPECTION ".
- If there is any malfunction, replace the CPP switch.
  
  Fig 1: Inspecting Continuity Between Clutch Pedal Position (CPP) Switch Terminals B & D
  Courtesy of MAZDA MOTORS CORP.

MEASUREMENT CONDITION AND CONTINUITY CHART

Measurement condition	Continuity
Push the rod.	No continuity
Except above	Continuity detected