LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Removal/Installation

Power Window SUBSWITCH Removal/Installation

  1. Disconnect the negative battery cable.
  2. Using a flathead screwdriver wrapped with protective tape, pry up the rear of the switch panel and detach the clip.
    Fig 1: Prying Up Rear Of Switch Panel & Detaching Clip Using A Flathead Screwdriver
    G04564268Courtesy of MAZDA MOTORS CORP.
  3. Remove the switch panel from the front door trim keeping the tab from catching.
  4. Disconnect the power window subswitch connector.
  5. Remove the screws, then remove the power window subswitch.
    6. Fig 2: Removing Power Window Subswitch
    G04564269Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals