LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Outer Mirror Switch Removal/Installation

Power Outer Mirror Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disengage clips using a tape-wrapped flathead screwdriver.
  3. Remove the switch panel from the front door trim keeping the tab from catching.
    Fig 1: Removing Switch Panel
    G04564285Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the power window main switch connector and power outer mirror switch connector.
  5. Remove the screws and the power outer mirror switch.
  6. Install in the reverse order of removal.
    Fig 2: Identifying Power Outer Mirror Switch
    G04564286Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals