LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Removing Ignition Switch Screws
    G04564647Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals