LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window Main Switch Removal/Installation

Power Window Main Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Using a flathead screwdriver wrapped with protective tape, pry up the rear of the switch panel and detach the clip.
    Fig 1: Prying Up Rear Of Switch Panel & Detaching Clip Using A Flathead Screwdriver
    G04564265Courtesy of MAZDA MOTORS CORP.
  3. Remove the switch panel from the front door trim keeping the tab from catching.
  4. Disconnect the power window main switch connector and the power mirror switch connector.
  5. Remove the screws, then remove the power window main switch.
  6. Install in the reverse order of removal.
    Fig 2: Removing Power Window Main Switch
    G04564266Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals