LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation[With Advanced Keyless System] >> Trunk Lid

Trunk Lid

  1. Disconnect the negative battery cable.
  2. Remove the rear bumper. (see REAR BUMPER REMOVAL/INSTALLATION .)
  3. Detach the request switch from the rear bumper.
  4. Install in the reverse order of removal.
Fig 1: Identifying Request Switch, Connector, Rear Bumper & Tab
G04928916Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals