Power Window Regulator Removal/Installation

1. Remove the battery cover.
2. Disconnect the negative battery cable.(See BATTERY REMOVAL/INSTALLATION [LF] .)
3. Remove the door trim.(See DOOR TRIM REMOVAL/INSTALLATION .)
4. Remove the door unit.(See DOOR UNIT REMOVAL/INSTALLATION .)
5. Remove the door glass.(See DOOR GLASS REMOVAL/INSTALLATION ..)
6. Remove the nuts.
   Fig 1: Regulator Nuts With Torque Specifications

   Courtesy of MAZDA MOTORS CORP.
7. Remove the power window regulator.
8. Install in the reverse order of removal.

Fig 2: Identifying Power Window Regulator

Courtesy of MAZDA MOTORS CORP.