LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> MX-5 Miata SV >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> On-Board Diagnostic Test >> Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

  1. Connect the M-MDS to DLC-2
    Fig 1: Locating DLC-2 Connector
    G04317682Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Toolbox"tab.
      2. Select "Self Test".
      3. Select "Modules".
      4. Select "PCM".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS screen.
  4. Retrieve the freeze frame PID data according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals