LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> MX-5 Miata SV >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> OBD-II Drive Mode >> PCM Adaptive Memory Production Drive Mode

PCM Adaptive Memory Production Drive Mode

  1. Start the engine and warm it up completely.
  2. Verify the following conditions and correct if necessary:
    • All accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
  3. Perform no load racing at the engine speed shown in Fig 1, then idle the engine for more than 60s  after the cooling fan has stopped. If possible, monitor RPM PID for engine speed during this procedure.
    Fig 1: PCM Adaptive Memory Production Drive Mode Graph
    G04317690Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals