Rear Window Defroster Installation Note

1. Remove the connector from the roof motor bracket.
2. Remove the wiring harness from clip A.
3. Remove clip B, then remove clip C while pulling it in the direction shown by the arrow avoiding the tab.
   Fig 1: Identifying Wiring Harness Clips

   Courtesy of MAZDA MOTORS CORP.
4. Remove the wiring harness from the roof link lock groove.
   Fig 2: Identifying Harness, Groove And Roof Link Lock

   Courtesy of MAZDA MOTORS CORP.
5. Remove clip D while pulling it in the direction shown by the arrow avoiding the tab.

Fig 3: Removing Clip D

Courtesy of MAZDA MOTORS CORP.