No.1 Additional Key Programming Procedure (Using Two Valid Keys): Notes
CAUTION:
- Do not place the following devices in the vehicle while programming, otherwise programming cannot be performed:
- Card key
- M-MDS
- Personal computer
- Devices that can send/receive the radio waves
Condition
- Have two or more valid keys.
NOTE:
- A maximum of eight keys can be programmed for one vehicle. If key programming is not successful and DTC 15 appears even though the procedure was performed properly, use the PID/data monitor function of the M-MDS and verify the number of keys that have been programmed.
- If eight keys have already been programmed, and it is necessary to program other keys, the previously programmed key ID numbers must first be cleared. To clear the key, refer to "NO.3 PCM REPLACEMENT PROCEDURE ".