LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> MX-5 Miata SV >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security System And Locks System (Advanced Keyless System) >> Immobilizer System Component Replacement/Key Addition And Clearing[Advanced Keyless System] >> M-MDS Connecting Procedure

M-MDS Connecting Procedure

CAUTION:
  • Do not place the M-MDS in the vehicle while programming, otherwise programming cannot be performed.
  1. Fully lower the door glass.
  2. Connect the M-MDS to the DLC-2.
  3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
CAUTION:
  • Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
Fig 1: Identifying DLC-2 Connector
G04931205Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals