LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note

DSC HU/CM Connector Removal Note

  1. Pull the lock lever up in the direction of the arrow.
  2. Pull the connector toward the vehicle rear and remove it.
    Fig 1: Identifying Lock Lever
    G04860259Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals