DTC P0942: Notes
DTC P0942 [AW6A-EL, AW6AX-EL] DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P0942 |
Valve control solenoid circuit malfunction at D range (valve stuck) |
| DETECTION CONDITION |
- Difference of less than 150 rpm
between engine and turbine speeds detected when following conditions are satisfied while driving:
Monitoring condition:
- Engine running
- Driving in D range
- Counter drive gear (output) revolution speed 500 rpm or more (VSS)
Diagnostic support note:
- This is a continuous monitor (CCM).
- The MIL illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- A PENDING CODE is not available.
- FREEZE FRAME DATA is available.
- The AT warning light illuminates.
- The DTC is stored in the TCM memory.
|
| POSSIBLE CAUSE |
- Shift solenoid A stuck
- Shift solenoid B stuck
- Shift solenoid C stuck
- C1 clutch slipping
- Control valve stuck
- TCM malfunction
|