DTC P0883: Notes

DTC P0883 [AW6A-EL, AW6AX-EL] DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0883

TCM B+ high

DETECTION CONDITION

Voltage of 18 V or more detected at TCM terminals A1 and A11 when engine is running.

Diagnostic support note:

This is a continuous monitor (CCM).
The MIL does not illuminate if the TCM detects the above malfunction condition during the first drive cycle.
A PENDING CODE is not available.
FREEZE FRAME DATA is available.
The AT warning light not illuminates.
The DTC is stored in the TCM memory.

POSSIBLE CAUSE

Generator malfunction
TCM malfunction