LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Lever Component Inspection

Selector Lever Component Inspection

  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Remove the dashboard completely. (See DASHBOARD REMOVAL/INSTALLATION ).
  4. Disconnect the selector lever component connector.
  5. Inspect for continuity at the selector lever component.
    • If there is any malfunction, adjust the selector cable. (See SELECTOR CABLE ADJUSTMENT .)
      Fig 1: Continuity Reference Chart
      G04860455Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Selector Lever Component Connector
      G04860456Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals