LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Service, Removal & Installation) >> Automatic Transaxle Removal/Installation >> Torque Converter Nuts Removal Note

Torque Converter Nuts Removal Note

  1. Align the holes by turning the torque converter.
  2. Insert a flathead screwdriver through the converter housing service hole, and lock the drive plate.
    Fig 1: Locking Drive Plate
    G04860377Courtesy of MAZDA MOTORS CORP.
  3. Remove the torque converter nuts.
    Fig 2: Identifying Torque Converter Nuts
    G04860378Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals