Climate Control Unit Inspection [Full-Auto Air Conditioner]: Notes

Remove the climate control unit. (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER] .)
Install the audio unit. (See AUDIO UNIT REMOVAL/INSTALLATION ).
Connect the climate control unit connector.
Connect the negative (-) lead of the tester to body ground.
Turn the ignition switch to the ON position.
By inserting the positive (+) lead of the tester into each climate control unit terminal, measure the voltage according to the terminal voltage table.
- If there is any malfunction, inspect the parts under "Inspection item (s)".
  - If the parts under "Inspection item (s)" are found to be normal (except for terminal T), replace the climate control unit.
  - For terminal T, first try replacing the power MOS FET. If there is still any malfunction, replace the climate control unit.